Myk Laticreate

Product Details:

MYK LATICRETE LATAFIX 307 is an economy-grade tile adhesive designed for installing small and medium-sized ceramic floor tiles in interior areas using the thin-set method of installation. Here are the details:

1. Applications:

   • Suitable for fixing ceramic tiles on interior floors and walls.
   • Economical and easy to use.
   • Ideal for new floor tiling.

2. Features & Benefits:

   • Polymer-Based: Contains Portland cement and silica sand.
   • Single Component: Just add water for mixing.
   • Coverage: Approximately 55–60 square feet per 20 kg bag using a ¼” x ¼” (6mm x 6mm) square-notch trowel for a 3mm bed.
   • Color Options: Grey.
   • Certifications:
     • ANSI: Meets ANSI A 118.1 T.
     • EN 12004/ISO 13007: C1T.
     • IS 15477:2019 TYPE 1 T ADHESIVE.
     • VOC: Practically Nil.

3. Application Process:

   • Substrate Preparation:
     • Ensure the surface is sound, clean, and free of dirt, oil, grease, curing compounds, or loose plaster.
     • Walls should be level within 3mm in 2.5m, and floors within 1.5mm in 1.0m.
   • Mixing:
     • Mix LATAFIX 307 with water until creamy and plastic.
     • Slake the mix for 5-10 minutes before use.
   • Installation:
     • Apply the adhesive with a flat side of the trowel, followed by additional mortar using the notched edge.
     • Select the appropriate notched trowel based on tile size.

Product Details:

MYK LATICRETE SP-100™ Tile Joint is a stain-resistant, water-resistant, and germ-resistant grout designed for both floor and wall applications. Here are the key details:

1. Applications:

   • Suitable for ceramic tiles, vitrified tiles, marble, and stone.
   • Ideal for areas prone to staining, such as kitchens and washrooms.

2. Features & Benefits:

   • Stain-Free: Provides excellent resistance against stains.
   • Color-Fast: Maintains its color over time.
   • Easy to Install and Clean: Ready-to-use and easy application.
   • Chemical and Temperature Resistant: Suitable for various conditions.
   • No Cracking or Powdering: Ensures durability.
   • Water-Leakage Resistant: Keeps surfaces fresh.
   • Attractive Color Options: Available in a range of colors.

3. Packaging:

   • Comes in a factory-proportioned kit with three components:
     • Resin (Part A)
     • Hardener (Part B)
     • Colored filler powder (Part C)
   • Available in different unit sizes:
     • 1/5th Unit (1.0 kg)
     • Full Unit (5.0 kg)

4. Coverage:

   • Coverage depends on tile size, joint width, and depth. Refer to the coverage chart for specific details.

5. Shelf Life:

   • Factory-sealed containers have a guaranteed first-quality shelf life of two (2) years when stored at temperatures between 0°C and 110°F (43°C).

6. Limitations:

   • Light colors may darken slightly due to direct UV exposure.
   • Consult Technical Services for specific exterior recommendations.
   • Not recommended for soft, polished, or delicate glazed tiles.
   • Use waterproof membranes when required (e.g., LATICRETE® Hydroban / 9237 Waterproof Membrane).

7. Cautions:

   • While curing, protect finished work from traffic during adverse weather.
   • Avoid prolonged contact with eyes or skin.
   • In case of contact, flush thoroughly with water.
   • Do not ingest.
   • Silica sand can cause serious lung problems; wear a respirator in dusty areas.
   • Keep out of reach of children.